The Classic Sound: Oberon Audiophile turntable.

This Custom build is crafted from a single piece of quilted Maple, the table utilizes an inverted ceramic bearing and a 2 1/2" acrylic platter, the motor is manufactured by Jasmine.

Also included is an solid Maple arm board built to spec for whatever tonearm you wish to utilize.

$2699.00 CAD without arm or $3599.00 CAD with the Jelco 750L

( This table is a limited production model and is based on component availability)

NEW  Corvus Tube Phono Stage

Corvus was developed to fill the need for a more affordable phono preamplifier while still maintaining a pure vacuum tube signal path.

Based on the 6922 with a time proven phono circuit licensed from Parks Audio LLC, there are no opamps or transistors in the signal path to boost gain. External power transformer for low noise. High voltage power is obtained using a multiplier with superior rated components for maximum effectiveness. A 40-second turn-on delay mute for greatly reducing the turn-on "thump" that can happen when powering up/down equipment out of proper sequence.

Comes with two matched-section Electroharmonix 6922

$699.90 CAD

Classic Sound is proud to announce the introduction of the Solaris phono stage from Classic Valve Design! 

The Solaris phono pre uses six matched section and matched transconductance 6922 tubes and passive RIAA equalization.
Totem-pole tube topology negates the need for a tube rectifier. DC heater supply uses Schottky rectifiers. Power-on delay as well as overload muting (factory set to trip if the output exceeds six volts P-P), should an input lead be carelessly pulled while the unit is powered, or in the case of a defective connector.
External PSU with 1 metre long umbilical for lowest induced noise possible.
Custom built only. Phono pre and 2 year limited warranty for

Introducing the CVD Procyon single-ended 300B

Tight bass, neutral mids and clear highs are what the Procyon delivers. This is all accomplished with zero gNFB.
The oversized Edcor output transformers gives this amplifier 10Hz capabilities. Unique AIST technology allows the output tubes to be driven effortlessly by the 6SL7 driver.
Rectifiers may be "rolled" and chosen to be either GZ34/5AR4, 5U4/5Z3P or 5R4.
Custom built only. Comes standard with EH Gold Grid 300B matched pair, matched sections Sovtek 6SL7GT matched pair, a 5U4 or 5Z3P (sonically determined before delivery) rectifier, unbalanced inputs and 2 year limited warranty for;

$3199.00 CAD 

Rogue Audio Cronus Magnum II

The award winning Cronus Magnum has garnered an enviable reputation in the high end audio world. Even at its attainable price, it outperforms other integrated amps costing many times more. The pure tube design provides a smooth, almost liquid sound that has made this amp a reviewer favorite. With circuitry borrowed from our most advanced amplifier designs, the Cronus Magnum's 100WPC effortlessly reproduces even the most demanding musical passages. Featuring a headphone amplifier and MM phono preamplifier the Cronus Magnum provides a complete solution to your amplifier needs.

$3350.00 CAD (optional tube cage 199.00 CAD)

Beautiful Denon turntable featuring a DP-1000 vintage motor unit with a DA-305 tonearm, absolute show piece. Stunning sound!

$1299.90  CAD

Technics SP-25 in a custom Walnut and Maple plinth featuring layered Baltic Birch construction.
This is one of the nicest Technics SP-25's I have seen in a while. The condition is amazing. Including the top of the line Denon tonearm DA-309!!

The SP-25 turntable offers a similar standard of excellence as the SP-10mkII professional units.


Sold

Lenco L-75, PTP Plinth, Solid Baltic Birch, satin finish, Removable arm board.

Custom Walnut and Figured Maple plinth for Denon turntables. Made to order for all Series DP-1000 through DP-80.

Thorens TD-125 MKII Transcription turntable, 3 speed 33, 45, & 16 rpm matched with an SME 3009 S2 improved tonearm. Shure V15 type II cartridge included. Custom Walnut plinth.

$1699.00 CAD

Thorens TD-145 in custom solid African Padauk, polished platter, featuring a  a Grace G-545F tonearm. The Grace arm works perfectly with lower-compliance phono cartridges (especially moving coils). Best of both worlds and gorgeous looks make this a classic to own. (Grace headshell included, not one shown.)

 Sold

Hardwood plinth for Thorens in any wood type

TD-145, TD-147, TD-160, TD-165, TD-166

Thorens TD-166BC with Beautiful Maple Plinth and Micro Seiki MA77 MKII tonearm and Shure M-91ED Cartridge, unit has been fully serviced with new belt and drive pulley. Absolutely, beautiful table awesome performance with new plinth.

Cherry Plinth for Garrard 301 Oversize dimensions to accomadate 12" tonearm.

$850.00 CAD 

If you want a Garrard 301 or 401 table built, Classic Sound can make your vision a reality,

Just go to our Orders page and let us know what you would like and we will work on a detailed quote.